OmniaTap
OmniaTap
The all-rounder.
For H2O pure type ASTM I + II
If you need both pure and ultrapure water in small quantities, OmniaTap is the perfect system for you.
The combination of highly modern filtering technologies enables pure and ultrapure water to be selectively dispensed from a single system. Connection can be directly to the tap water supply.
Dispensing of ultrapure water of type ASTM I is from the flexible dispenser. Your selection requires only a touch of a dispenser digital control button. The pure water in the installed 10-litre tank is constantly recirculated for maintenance of the ASTM II quality.
Features:
OptiFill dispenser is standard
TapWater set for direct connection to a drinking water tap
Small table top or wall mounted system
Type ASTM I dispensing rate is 2 l/min
Type ASTM II generation in tank is up to 20 l/h fully upgradeable from smaller system
Standard 10-litre pure water tank with an option of 30 or 60 or 100 ltrs tank.
Leakage sensor is standard
Unique Level sensor saves tank water from contamination
Specifications:
| Specifications | OmniaTap | OmniaTap UV | OmniaTapUV/UF |
| Type II Water | |||
| Generation performance @ 15°C | 6 / 12 / 20 | 6 / 12 / 20 | 6 / 12 / 20 |
| Conductivity μS/cm | 0.067 – 0.1 | 0.067 – 0.1 | 0.067 – 0.1 |
| Resistivity MΩ.cm | 15 – 10 | 15 – 10 | 15 – 10 |
| TOC Value ppb | < 30 | < 30 | < 30 |
| Pure water Pressurized outlet (See Accessories) | Optional | Optional | Optional |
| Retention of Bacteria, Particles and Pyrogens by RO Stage | 95 – 99% | 95 – 99% | 95 – 99% |
| Type I Water | |||
| Conductivity μS/cm | 0.055 | 0.055 | 0.055 |
| Resistivity MΩ.cm | 18.2 | 18.2 | 18.2 |
| TOC Value* ppb | 5 – 10 | 1 – 5 | 1 – 5 |
| Dispensing Rate l/min | Upto 2 | Upto 2 | Upto 2 |
| Endotoxins / Pyrogens* Eu/ml | – | – | < 0.001 |
| Particles 0.2 μm/ml | No particles with size > 0.2 μm | No particles with size > 0.2 μm | No particles with size > 0.2 μm |
| Bacterial Content** CFU/ml | < 0.01 | < 0.01 | < 0.01 |
| RNases pg/mL | – | – | <1 |
| DNases pg/mL | – | – | <5 |
| Proteases μg/mL | – | – | <0.15 |
| Feedwater Specifications | |||
| Conductivity μS/cm | < 2500 | < 2500 | < 2500 |
| TOC ppb | < 2000 | < 2000 | < 2000 |
| Chlorine content mg/l | < 5 | < 5 | < 5 |
| Silt Density / Fouling Index (SDI or FI)# | < 12## | < 12## | < 12## |
| Manganese and Iron content mg/l# | < 0.1 | < 0.1 | < 0.1 |
| Temperature °C | 2 – 35 | 2 – 35 | 2 – 35 |
| Hardness *** | Upto 300ppm | Upto 300ppm | Upto 300ppm |
| Technical Data | |||
| Operating Pressure bar | 2 – 6 | 2 – 6 | 2 – 6 |
| Supply Voltage Volts/Hz | 90 – 240/50-60 | 90 – 240/50-60 | 90 – 240/50-60 |
| Power Consumption kW | 0.1 | 0.1 | 0.1 |
| Water Connections | 8mm | 8mm | 8mm |
| Ambient Temperature | 2 – 35 | 2 – 35 | 2 – 35 |
| Dimensions W X H X D mm | 390 X 720 X 615 | 390 X 720 X 615 | 390 X 720 X 615 |
| Weight | 20 | 21 | 21 |
* Dependent on feedwater quality
**With sterilizing filter 0.2 μm
System Variants:
| Part No. | System Name | Typical Applications |
| 18200051 | OmniaTap 6 | Elemental Analysis AAS, ICP, IC, buffers, media, etc… |
| 18200101 | OmniaTap 12 | |
| 18200052 | OmniaTap 6 UV | Organic and Ultratrace Elemental Analysis HPLC, ICP, IC, LCMSMS, etc… |
| 18200102 | OmniaTap 12 UV | |
| 18200053 | OmniaTap 6 UV/UF | Life Science, Mol Bio, PCR and Organic and Ultratrace Elemental Analysis HPLC, ICP, IC, LCMSMS, etc… |
| 18200103 | OmniaTap 12 UV/UF |
Accessories:
| Part No. | System Name |
| 19200300 | Wall Mount for Omnia |
| 19200056 | Disinfection Kit for Omnia |
| 19200057 | Disinfectant Omnia – 3pcs/pk |
| 19200021# | 3 Stage Automatic Prefiltration 10” |
| 18200023 | 3 Stage Prefiltration 20” |
| 06.5030 | Tank 30 Ltr |
| 06.5060 | Tank 60 Ltr |
| 19200100 | Tank 100 ltr |
| 16125000## | Mix Multi Mini pretreatment for SDI above 12 |
| 19102100 | POU Biofilter |
