OmniaLab ED+
OmniaLab ED + is the system of choice when both pure and ultrapure water is needed for the complete laboratory supply. The system meets international water standards such as ASTM, ISO 3696, CLRW (CLSI) and is economically maximized by combining with continuously self-regenerating electro-deionization without sacrificing demanding analytic applications. In addition, the OmniaLab ED+ system holds 100 liters of pure water type II in a storage tank with quality recirculation ready for collection. OmniaLab ED + is the obvious choice for the supply of autoclaves or laboratory glassware washers and the removal of ultrapure water type I for analytical and life sciences applications.
Features:
OptiFill Dispenser as standard
Continuous desalination by means of electro-deionization
100 l tank with recirculation and pressure output Tank to connect to external instrument such as Omniapure system
Volume display in percent Tank with fully programmable tank full, empty limits
Easy and economical filter replacement
Leakage sensor as standard
Microbial purity is ensured by interval recirculation and/or UV in the system.
Install as tower unit or under-table option
Type ASTM I dispense @ 2 l/min
Type ASTM II generation rate up to 70 l/h
Standard 100 litre storage tank for ASTM II pure water. Extra 100 ltr tank can be connected in parallel
Unique non contacting level sensor helps keep water clean and fresh
Specifications:
| Specifications | OmniaLabED 20 | OmniaLabED 40 | OmniaLabED 70 |
| Type II, CLRW (CLSI) grade water | |||
| Generation performance @ 15°C | 20 | 40 | 70 |
| Conductivity μS/cm (Typically 0.067 – 0.1 μS/cm) | < 0.1 | < 0.1 | < 0.1 |
| Resistivity MΩ.cm (Typically 15 – 10MΩ.cm) | > 10 | > 10 | > 10 |
| TOC Value ppb | < 30 | < 30 | < 30 |
| Pure water Pressurized outlet | Standard | Standard | Standard |
| Retention of Bacteria, Particles and Pyrogens by RO Stage | 95 – 99% | 95 – 99% | 95 – 99% |
| Particles 0.2 μm/ml (Dispense from system dispenser) | No particles with size > 0.2 μm | No particles with size > 0.2 μm | No particles with size > 0.2 μm |
| Bacterial Content** CFU/ml | < 0.01 | < 0.01 | < 0.01 |
| UV Photo-Oxidation 185 / 254nm | Optional | Optional | Optional |
| Type I Water | |||
| Conductivity μS/cm | 0.067 – 0.1 | 0.067 – 0.1 | 0.067 – 0.1 |
| Resistivity MΩ.cm | 15 – 10 | 15 – 10 | 15 – 10 |
| TOC Value ppb (with UV unit 19200052) | 1 – 5 | 1 – 5 | 1 – 5 |
| Dispensing Rate l/min | Upto 2 | Upto 2 | Upto 2 |
| Retention of Bacteria, Particles and Pyrogens by RO Stage | 95 – 99% | 95 – 99% | 95 – 99% |
| Feedwater Specifications | |||
| Conductivity μS/cm | < 2500 | < 2500 | < 2500 |
| TOC Value ppb | < 2000 | < 2000 | < 2000 |
| Chlorine content mg/l | < 5 | < 5 | < 5 |
| Silt Density / Fouling Index (SDI or FI)# | < 12## | < 12## | < 12## |
| Manganese and Iron content mg/l# | < 0.1 | < 0.1 | < 0.1 |
| Temperature °C | 2 – 35 | 2 – 35 | 2 – 35 |
| Technical Data | |||
| Operating Pressure bar | 2 – 6 | 2 – 6 | 2 – 6 |
| Supply Voltage Volts/Hz | 90 – 240/50-60 | 90 – 240/50-60 | 90 – 240/50-60 |
| Power Consumption kW | 0.25 | 0.25 | 0.25 |
| Water Connections | 8mm | 8mm | 8mm |
| Ambient Temperature | 2 – 35 | 2 – 35 | 2 – 35 |
| Dimensions W X H X D mm | 511 X 1520 X 575 | 511 X 1520 X 575 | 511 X 1520 X 575 |
| Weight | 41 | 41 | 43 |
* Dependent on feedwater quality
**With sterilizing filter 0.2 μm and UV254nm
System Variants:
| Part No. | System Name | Typical Applications |
| 18700020 | OmniaLabED+ 20 | Dissolutions apparatus, media and buffers preparation, glassware rinsing, microbiology, feedwater to clinical biochemistry Analyzers, OmniaPure systems, etc… |
| 18700040 | OmniaLabED+ 40 | |
| 18700070 | OmniaLabED+ 70 |
Accessories:
| Part No. | System Name |
| 19200050 | UV Tank disinfection unit 254nm |
| 19200051 | UV flow through disinfection 254nm |
| 19200021# | 3 Stage Automatic Prefiltration 10” |
| 18200023 | 3 Stage Prefiltration 20” |
| 19200100 | Tank 100 ltr |
| 16125000## | Mix Multi Mini pretreatment for SDI above 12 |
| 19102100 | POU Biofilter |
